|
|
Experimental analysis focused on the effect of chloride salt on neutron flux with different energy levels
Slančík, Tomáš ; Števanka, Kamil (referee) ; Katovský, Karel (advisor)
Master’s thesis focuses on the history and current progress in research of molten salt reactors around the world, with an emphasis placed on the properties of molten salts and the problems associated with their use. In relation to the practical part, one chapter is devoted to the creation of input file in the MCNP software. The practical part deals with neutron activation analysis of graphite prism experiment, which is filled with powder NaCl salt. This experiment is focused on the effect of salt on neutron flux with different energy levels. The whole problem was also simulated in the MCNP environment along with the experiment. At the end of the thesis, the individual methods are compared and evaluated.
|
|
|
The AmBe Laboratory Neutron Source Field Determination Using Experimental Stend
Jelínek, Martin ; Šťastný, Ondřej (referee) ; Katovský, Karel (advisor)
This master’s thesis provides a comprehensive overview of the conventional neutron sources from the perspective of reactions which lead to the production of neutrons, advantages, disadvantages, properties and their possible utilization. In the relation to the assembly of the laboratory neutron source and the unique experimental stand “Candle” basic methods of the neutron field analysis are outlined and two of them, the neutron activation analysis and the calculation using the MCNP software code are discussed in depth to apply and compare these methods. The experimental part deals with the realization of neutron activation analysis from its design itself, through gamma spectrometry to the cadmium ratio calculation. In compliance with the measurements, a calculation with MCNP code was run and both methods were evaluated and compared. The computation is complemented with the analysis of radiation situation on the borders of the supervised area, which is compared to the legal limit.
|
|
|
Safety of the fuel stored in water pool
Mičian, Peter ; Novotný, Filip (referee) ; Foral, Štěpán (advisor)
This diploma thesis deals with storing the spent nuclear fuel and reviewing its safety. The theoretical part analyzes the processes taking place while the fuel is being used, such as fission, isotopic changes, fission gas release, cracking, swelling and densification of fuel pellet. The thesis is also focused on handling the spent fuel and on the way it makes from the reactor, through the spent fuel pool, the transportation, various kinds of storing, till the reprocessing and final deep geological repository. Furthermore, this part of the thesis briefly discusses computing code MCNP, its main characteristics, input files and using. The practical part of the work is focused on creating the model of the spent fuel pool located next to the nuclear reactor WWER 440/V213. This type was chosen, because it is the most used type of nuclear reactor in Czech Republic and Slovakia. With the help of the code MCNP, the multiplication factor of the main configurations of the fuel in the pool was calculated, and then the required safety regulations to ensure sufficient subcriticality, so its safety, were checked. Next, several analysis were performed using this model. These analyses were concerning the temperature of coolant, fuel and the use of various nuclear data libraries. In the future this model can be used to realize new analyses with new kinds of fuels, materials and data libraries.
|
|
|
Ionizing radiation shielding simulation using MCNP code
Konček, Róbert ; Košťál,, Michal (referee) ; Katovský, Karel (advisor)
Radiation is defined as ionizing if it has enough energy to remove electrons from atoms or molecules when it passes through or collides with matter. This ability implies potentially detrimental effects on living tissue. Ionizing radiation shielding is therefore a discipline of great practical importance. The thesis builds upon the author's previous work on the topic and widens the scope of discussion with theoretical and practical issues of advanced shielding calculations. The theoretical part of the thesis describes several approaches to calculating fluence or absorbed dose at an arbitrary point in space. Point-kernel methods provide sufficiently accurate results for simpler shielding problems. In many practical cases, however, calculations based on the transport theory are necessary. There are two basic types of transport calculations: deterministic transport calculations in which the linear Boltzmann equation is solved numerically, and Monte Carlo calculations in which a simulation is made of how particles migrate stochastically through the problem geometry. Advantages and disadvantages of both methods are discussed. In the practical part are the results of radiation shielding calculations performed with a major Monte Carlo code - MCNP6, compared with those obtained in the experiments, which were carried out at the Ionizing Radiation Laboratory at Department of Electrical Power Engeneering, FEEC BUT. The experiments consisted of placing a cobalt-60 radioisotope source at three different positions inside a lead collimator, and counting pulses with two different scintillation detectors positioned in front of the opening of the collimator, alternately with or without lead shield located between the source and the used detector. Agreement of the calculations and the data from the measurements is reasonable, given the inherent uncertainties of the experimental set-up. Performed sensitivity analysis shows relative importances of different parameters used as inputs in simulations, such as densities of materials, or dimensions of the scintillation crystals. Annotated MCNP input files used for simulation are also part of the thesis.
|
|
| |
|
|
Shielding and detection of neutrons
Černý, Tomáš ; Šťastný, Ondřej (referee) ; Katovský, Karel (advisor)
The master’s thesis provides an overview of available neutron sources in terms of neutron yields and energy spectrum of emitted neutrons. Reactions of neutrons with matter, especially neutron scattering and radiation capture, are described. The possibilities neutron neutron detection and spectrometry are also described. The following experiment deals with a design of suitable shielding materials and the analysis of the moderated energy spectrum of neutron flux. The properties of the neutron field were measured using detection by activation. Subsequently, a simulation of the problem was performer in the MCNP program. In the end, the achieved results are compared and evaluated.
|
|
|
Analysis Of Various Candidate Salts For Molten Salt Reactor Application By Mcnp Software
Petrosyan, Taron
In present study, the model of Molten Salt Reactor was developed for Monte Carlo NParticle Transport [1] computational code analysis. In the course of work, two main tasks were fulfilled, which are simulation of target material behavior as a neutron convertor (producer) under 800MeV energy proton beam and criticality calculation of the designed reactor. As a result of analysis through the MCNP software, neutron flux, as well as the value of 𝑘𝑒𝑓𝑓 multiplication factor of Molten Salt Reactor for a number of different molten salts compositions assessed.
|
|
|
Shielding and detection of neutrons
Černý, Tomáš ; Šťastný, Ondřej (referee) ; Katovský, Karel (advisor)
The master’s thesis provides an overview of available neutron sources in terms of neutron yields and energy spectrum of emitted neutrons. Reactions of neutrons with matter, especially neutron scattering and radiation capture, are described. The possibilities neutron neutron detection and spectrometry are also described. The following experiment deals with a design of suitable shielding materials and the analysis of the moderated energy spectrum of neutron flux. The properties of the neutron field were measured using detection by activation. Subsequently, a simulation of the problem was performer in the MCNP program. In the end, the achieved results are compared and evaluated.
|
|
| |
|
|
Experimental analysis focused on the effect of chloride salt on neutron flux with different energy levels
Slančík, Tomáš ; Števanka, Kamil (referee) ; Katovský, Karel (advisor)
Master’s thesis focuses on the history and current progress in research of molten salt reactors around the world, with an emphasis placed on the properties of molten salts and the problems associated with their use. In relation to the practical part, one chapter is devoted to the creation of input file in the MCNP software. The practical part deals with neutron activation analysis of graphite prism experiment, which is filled with powder NaCl salt. This experiment is focused on the effect of salt on neutron flux with different energy levels. The whole problem was also simulated in the MCNP environment along with the experiment. At the end of the thesis, the individual methods are compared and evaluated.
|
guest ::
